Oil Rubbed Bronze Cabinet Handles Pull Cup Pulls Knobs Kitchen Drawer Hardware. BRAND NEW HANDLE PULL KNOB. Installation is easy and the necessary mounting hardware is included.
The items are packaged in a poly bag with the screws packaged separate from the handle in their own bag with the handle. Please see our other matching hardware. Each handle is individually packaged with screws. Mid Height Projection: 1 (25mm).
The thread size is #8-32. Screw length is approximately 1 inch. Finish Shown: Satin Nickel, Oil Rubbed Bronze. Finish Shown: Oil Rubbed Bronze. Mid Height Projection: 1-1/8 (29mm).Mid Height Projection: 1-1/4(31mm). While there are no hard, fast rules for placement of a knob or pull on a cabinet door, most cabinet makers will locate them approximately 3"-4" above the upper non-hinged corner on base cabinets, or the lower non-hinged corner on wall cabinets. However, the decision is yours to make! When drilling for a knob or pull, a 3/16 hole is recommended for most styles. The exception is pulls that have "studs". A stud is simply an extension of the molded screw holes.
If a pull has a stud, then a 1/4 hole is required with studs sittingsecurely in the wood. Swiss Kelly includes 8-32 x 1" long machine screws with most knobs and pulls because the typical cabinet door or drawer front is 3/4" thick. This screw length should work in most applications. However, if your cabinet doors or drawer fronts are thicker than 3/4, then you will need to use longer screws for mounting.
Check the thickness of both a cabinet door and a drawer front in your kitchen, as the thickness dimensions may not be the same. In general, the screw length(s) used should be 1/4 longer than the thickness of your cabinet door or drawer front material. It is not uncommon for some drawers to be constructed with a 3/4" thick front attached to a 3/4" thick drawer box.
In this situation, the total drawer thickness is 1-1/2", making a 1-3/4" long screw necessary for mounting. Swiss Kelly offers a broad range of sizes to choose from. How to Choose the Right Size. Take note of all sizes available. 3 is the most common size pull.
Size is determined by measuring from hole to hole, not by the length of the pull itself. If you are using a pull, you will want to determine the hole center spacing of the pull.3 hole centers are the most common, however, Swiss Kelly offers a wide variety of sizes. This will help to ensure that they are parallel with the door or drawer edge and that they are the same placement height on every cabinet. An example is provided below, however, do not use this for drilling purposes as printers may provide template distortions. Knobs can be obtained in a variety of sizes, shapes, and diameters. There are no right or wrong sizes when it comes to selecting the appropriate knob size. Choose the size that looks best in proportion to the size of your cabinet doors and drawers. A 1-1/4" or 1-3/8" diameter knob is the most popular.
To create a dramatic effect, consider using a large (1-1/2" diameter or greater) or small (1" diameter or smaller) sized knob. Small sized knobs also work well on applications such as apothecary drawers, spice drawers, pullout cutting boards, etc.
This will help to ensure that the knob is positioned properly on the cabinet door or drawer front and that there is the same placement height on every cabinet. When replacing pulls, the choices are numerous. You may choose to go with a pull with the same hole centers as your existing pull.Pull size is determined by measuring from hole to hole, not by the length of the pull itself. However, if you do choose to use a pull which is longer or shorter, the following information will assist you. On wall cabinets, reuse the bottom hole and drill a new top hole. On base cabinets, reuse the top hole and drill a new bottom hole. On drawers, drill two new holes and realign in the center. When replacing knobs, simply unscrew your old knob. Leaving the old screw in place, screw on your new knob. Listing and template services provided by inkFrog. The item "Oil Rubbed Bronze Cabinet Handles Pull Cup Pulls Knobs Kitchen Drawer Hardware" is in sale since Tuesday, June 20, 2017.
This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Cabinets & Cabinet Hardware\Cabinet Knobs & Pulls". The seller is "swiss-kelly" and is located in Pleasant Prairie, Wisconsin. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.